Tag: M.W:200-300

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Ferrocenemethanol, and cas is 1273-86-5, its synthesis route is as follows.

In a Schlenk tube, 1.00 g (4.63 mmol) of ferrocenyl methanol and 0.47 mL(4.7 mmol) of 2,4 pentanedione were dissolved in 8 mL of acetonitrile at room temperature (rt). After 5 min of stirring, 0.125 g (0.23 mmol) of cerium(IV)ammonium nitrate (5% molar) were added. The reaction mixture was stirred for 30 min at rt and then evaporated under reduced pressure. The solid residue was mixed with 5 mL of water and extracted with 10 mL of dichloromethane.The organic phase was dried over MgSO4, filtered off and evaporated under reduced pressure to afford 1.25 g (4.29 mmol, 90% yield) of 1 as an orange oil.

1273-86-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1273-86-5 ,Ferrocenemethanol, other downstream synthetic routes, hurry up and to see

Reference：
Article; Ahumada, Guillermo; Roisnel, Thierry; Hamon, Jean-Rene; Carrillo, David; Manzur, Carolina; Journal of the Chilean Chemical Society; vol. 58; 4; (2013); p. 1963 – 1966;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1287-16-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenylacetic acid, cas is 1287-16-7,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of ferrocene acetic acid (1 mmol), the required 3-substituted-4-amino-5-mercapto-1,2,4-triazole(1 mmol), and p-toluenesulfonic acid (0.1 mmol) in DMF(10 mL) was stirred until a homogeneous solution was obtained. The mixture was exposed to microwave irradiation for about 3 min at 350 W and then cooled and poured into crushed ice. The mixture was adjusted to pH 7 with potassium carbonate and potassium hydroxide and then kept overnight at room temperature. The crude product was filtered off, dried and recrystallized from 80% ethanol to afford the pure product (Scheme 1).

The chemical industry reduces the impact on the environment during synthesis,1287-16-7,Ferrocenylacetic acid,I believe this compound will play a more active role in future production and life.

Reference：
Article; Liu, Yuting; Xin, Hong; Yin, Jingyi; Yin, Dawei; Transition Metal Chemistry; vol. 43; 5; (2018); p. 381 – 385;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

12093-10-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenecarboxaldehyde, cas is 12093-10-6,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a typical procedure, 1.39 mmol of 2?-hydroxyacetophenone (for 1 and 3) or 2?-hydroxy-4?-methoxyacetophenone (for 2 and 4) were dissolved in 40 ml of methanol. To this solution, 4 equivalent of potassium hydroxide were added and stirred for 15 min at room temperature. Then, 1.40 mmol of the appropriate ferrocenecarboxaldehyde derivative, (i.e. 1-ferrocenecarboxaldehyde for 1 and 2 or 1,1-ferrocenedicarboxaldehyde for 3 and 4) were added. The mixture was stirred during three days at room temperature. Then, methanol was evaporated in vacuum (rotary evaporator) and the crude reaction mixture was submitted to column chromatography (silica gel 60, Ethyl acetate: Hexane = 3:10 v/v).

The chemical industry reduces the impact on the environment during synthesis,12093-10-6,Ferrocenecarboxaldehyde,I believe this compound will play a more active role in future production and life.

Reference：
Article; Trujillo, Alexander; Ocayo, Fernanda; Artigas, Vania; Santos, Juan C.; Jara-Ulloa, Paola; Kahlal, Samia; Saillard, Jean-Yves; Fuentealba, Mauricio; Escobar, Carlos A.; Tetrahedron Letters; vol. 58; 5; (2017); p. 437 – 441;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

It is a common heterocyclic compound, the iron-catalyst compound, Aminoferrocene, cas is 1273-82-1 its synthesis route is as follows.

General procedure: Organometallic sulfonamides were prepared following a modification of the procedure described by Alberto and co-workers [41]. An equimolar amount of pyridine was added at room temperature to a solution containing 50mg of P2 or P3 in 7.0mL of anhydrous CH2Cl2. After 15min, the corresponding sulfonyl chloride derivative was added, and the reaction mixture was heated under reflux for 24h. The resulting solution was dried under vacuum. The crude product was purified using silica gel liquid chromatography and a mixture of CH2Cl2/hexane (4:1) as the eluent. All compounds were recrystallized from an acetone/hexane (1:5) mixture by slow evaporation.

1273-82-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1273-82-1 ,Aminoferrocene, other downstream synthetic routes, hurry up and to see

Reference：
Article; Quintana, Cristobal; Silva, Gisella; Klahn, A. Hugo; Artigas, Vania; Fuentealba, Mauricio; Biot, Christophe; Halloum, Iman; Kremer, Laurent; Novoa, Nestor; Arancibia, Rodrigo; Polyhedron; vol. 134; (2017); p. 166 – 172;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Ferrocenecarboxaldehyde, and cas is 12093-10-6, its synthesis route is as follows.

General procedure: A solution of pure TsNHNH2 (15 mmol) in methanol (30 mL) was stirred and heated to 60 C until the TsNHNH2 dissolved. The mixture was cooled to room temperature. Then a solution of ferrocenylketone (10 mmol) in methanol was dropped into the mixture slowly. After approximately 0.5-2 h, the crude products could be obtained as solid precipitate. The precipitate was washed with petroleum ether then removed in vacuo to give the pure products. In general, the yields were 68-86 %. Because of the relatively low activity of some ketones, their reactions at room temperature may be incomplete. They should be reacted in refluxing methanol. The reaction could be monitored by TLC.

12093-10-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,12093-10-6 ,Ferrocenecarboxaldehyde, other downstream synthetic routes, hurry up and to see

Reference：
Article; Ling, Li; Hu, Jianfeng; Huo, Yanhong; Zhang, Hao; Tetrahedron; vol. 73; 1; (2017); p. 86 – 97;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1271-42-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenecarboxylic acid, cas is 1271-42-7,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

0120] Ferrocene (6.0 g, 32 mmol) and potassium tert-butoxide (0.46 g, 4.08 mmol) were completely dissolved in dryTHF (300 mL). The orange solution was cooled to -78C when tert-butyllithium (34.0 mL, 64.5 mmol, 1.9 M in pentane)was added dropwise over a period of 15 min, with the temperature maintained below -70C. The reaction mixture wasstirred at -78C for 1 h and then poured on a slurry of dry ice (excess) and diethyl ether. The mixture was warmed toroom temperature overnight and extracted with an aqueous solution of sodium hydroxide (0.75 N, 4 x 250 mL). Thecombined aqueous layers were neutralized with hydrochloric acid (pH > 4) and the resulting orange solid was extractedwith Et2O (4 x 250 mL) until the organic layer remained colourless. The combined organic layers were filtered to removetraces of ferrocenedicarboxylic acid, dried over MgSO4, filtered and the solvent was evaporated under reduced pressureto give ferrocenecarboxylic acidas an orange solid in 35% yield. After suspending the ferrocenecarboxylic acid (462 mg,2.01 mmol) in dry CH2Cl2 (23 mL), oxalyl chloride (1100 mL, 13.64 mmol) in dry CH2Cl2 (10 mL) was added dropwiseto the reaction mixture whereby the orange suspension turned dark red. The reaction mixture was refluxed for 2 h andthen stirred overnight at room temperature. The solvent was then removed under vacuum. The product was not purifiedand used immediately for the next synthetic step.

The chemical industry reduces the impact on the environment during synthesis,1271-42-7,Ferrocenecarboxylic acid,I believe this compound will play a more active role in future production and life.

Reference：
Patent; Universitaet Zuerich; The University of Melbourne; Gasser, Gilles; Gasser, Robin B.; Hess, Jeannine; Patra, Malay; Jabbar, Abdul; EP2821412; (2015); A1;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1271-42-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenecarboxylic acid, cas is 1271-42-7,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

In a three-necked flask, 4.6 g (0.02 mmol) of dry ferrocenecarboxylic acid and 80 mL of anhydrous benzene were added.Under nitrogen protection,6.24 g (0.03 mmol) of phosphorus pentachloride was slowly added in several portions, and stirred at room temperature for 3 h.The benzene is distilled off under reduced pressure, and petroleum ether (60-90 C) is extracted to obtain a deep red solution, distilled under reduced pressure, and cooled.Dark red needle crystals are precipitated, yield 80%

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Ferrocenecarboxylic acid, 1271-42-7

Reference：
Patent; Guilin Medical University; Huang Wanyun; Liao Ying; Peng Xiangyan; Yin Penglong; Liao Yueying; (13 pag.)CN104788503; (2017); B;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

Name is Ferrocenecarboxaldehyde, as a common heterocyclic compound, it belongs to iron-catalyst compound, and cas is 12093-10-6, its synthesis route is as follows.

General procedure: (i-Pr-Pybox)ZnCl2 (2b) (10.9 mg, 0.025 mM, 0.1 equiv) was added in H2O (0.5 mL), thenferrocenecarboxaldehyde (53.4 mg, 0.25 mM, 1.0 equiv) and activated methylene compound(0.5 mM, 2.0 equiv) were added. The mixture was stirred at room temperature forfew minutes, after which the crude reaction mixture was loaded directly onto a column ofsilica gel and purified by column chromatography to give the solid.

12093-10-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,12093-10-6 ,Ferrocenecarboxaldehyde, other downstream synthetic routes, hurry up and to see

Reference：
Article; Jia, Wei-Guo; Li, Dan-Dan; Zhang, Hui; Dai, Yuan-Chen; Sheng, En-Hong; Journal of Coordination Chemistry; vol. 68; 2; (2015); p. 220 – 228;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1273-82-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Aminoferrocene, cas is 1273-82-1,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

(Aminoferrocenyl)(ferrocenyl)carbene(pentacarbonyl)tungsten(0) (W(CO)5(E-2)): 402 mg (2.0 mmol) of Fc-NH2 and 1132 mg (2.0 mmol) of W(CO)5(1Et) where dissolved in dryTHF (40 mL). 1595 mg (8.0 mmol) of potassium hexa methyldisilazide(KHMDS) in dry THF (40 mL) were added with in 5.5 h while stirring at room temperature. The reaction was monitored by TLC to check the reaction progress and to stopthe reaction before extensive imine formation occurs. After 8 h,the solvent was removed under reduced pressure and anaqueous saturated NaHCO3 solution (100 mL) was added.The aqueous phase was extracted with dichloromethane(3 × 100 mL) and the combined organic phases were washed with aqueous saturated NaHCO3 solution (2 × 100 mL) and brine (2 × 100 mL). The organic phase was dried over MgSO4. After evaporation of the solvent under reduced pressure, a crudered product was obtained (1.04 mg). Purification by columnchromatography (SiO2; 40 cm × 5.5 cm; petroleum ether (40/60):CH2Cl2 1:1; Rf (Fc-NH2) = 0.0, Rf (E-3) = 0.5,Rf (W(CO)5(E-2)) = 0.8) yielded 403 mg (0.56 mmol, 28%) of deep red crystalline needles. 1H NMR (CD2Cl2): delta 10.50 (s, 1H,H6), 4.73 (pt, 2H, H8), 4.71 (pt, 2H, H3), 4.62 (pt, 2H, H2),4.37 (s, 5H, H1/10), 4.33 (pt, 2H, H9), 4.32 (s, 5H, H1/10) ppm; 13C NMR (CD2Cl2) delta 259.6 (C5), 204.4 (C12), 199.3(C11,1JWC = 127 Hz), 99.7 (C7), 97.7 (C4), 72.1 (C2), 70.7(C3), 70.6 (C1/10), 70.2 (C1/10), 69.1 (C8), 67.8 (C9) ppm; MS(FD) m/z (int.): 721.0 (100, [M]+); IR (KBr) : 3335 (m, NH),3107 (s, CH), 2058 (vs, CO), 1977 (vs, CO), 1899 (br, CO),1508 (s), 1350 (m), 1238 (m), 1057 (m), 822 (m), 600 (s), 579(m), 480 (m) cm-1; IR (CH2Cl2) : 2060 (vs, CO A1), 1975 (s,CO B1), 1921 (br, CO E, A1), 1503 (m) cm-1; IR (CD2Cl2) :3439 (w, NH(W(CO)5(Z-2))), 3240 (m, NH(W(CO)5(E-2)))cm-1; UV-vis (CH2Cl2) lambdamax (epsilon): 290 sh (15370), 355 (11020),387 (11680), 468 sh (2570 M-1 cm-1) nm; CV (THF, vs FcH/FcH+): E1/2 = -2.38 V (qrev.), Ep,ox = 0.26, 0.48 V, Ep,red =0.17, -0.15, -0.76 V; Anal. calcd for C26H19Fe2NO5W (720.95): C, 43.31; H, 2.66; N, 1.94; found: C, 43.30; H, 2.69;N, 1.91.

The chemical industry reduces the impact on the environment during synthesis,1273-82-1,Aminoferrocene,I believe this compound will play a more active role in future production and life.

Reference：
Article; Veit, Philipp; Foerster, Christoph; Heinze, Katja; Beilstein Journal of Organic Chemistry; vol. 12; (2016); p. 1322 – 1333;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1273-86-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenemethanol, cas is 1273-86-5,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

(3) Chlorinated ferrocene methane synthesis: under the protection of the helium, the ferrocene methanol (250 mg, 1 . 16 mmol) dissolved into dichloromethane (20 ml) in, then the oxalyl (6 drops, excess) into the wherein after then completing, in helium under the protection of the stirring 4 h, after the reaction, the solvent is removed by reduced pressure distillation, for fixing the residue water (10 ml) flushing.(4) Containing ferrocene group of the carbamate compound synthesis: amount taking 0. 6 Ml (1.0 mmol) is dissolved in carbon disulfide and 5 ml of ethanol, measuring the 2.4 g (1.0 mmol) di-n-octyl amine and 1.4 ml (i. the 0 1.0 mmol) triethylamine are added 1 a 50 ml three flasks; under the condition of the ice slowly dripping into carbon bisulfide ethanol solution, stirring 1 h; the removal of the ice bath, in the continuing stirring at room temperature 2 h; then adding 0.25 g (1.0 mmol) chloro ferrocene methane ethanol solution of 10 ml, to control the temperature 5 C following reaction 1 h, then raising the stirring to reflux 2 h; TLC monitoring the reaction, solvent system as developing solvent (benzene and acetone of volume ratio of 1:1); boil off ethanol, adding anhydrous ethyl ether 20 ml, filtering out the deposit, the filtrate water washing 3 times, then the molecular sieve drying, filtering, the steamed ethyl ether to obtain yellow solid, yield 82. 8%, Melting point 100 – 102 C.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Ferrocenemethanol, 1273-86-5

Reference：
Patent; Shandong Yuangen Petrochemical Co., Ltd.; Qiao Liang; Yuan Junzhou; Song Laigong; He Jingsong; Liu Shanshan; (7 pag.)CN104710482; (2018); B;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion