Iron catalyst

1271-55-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Acetylferrocene, cas is 1271-55-2,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of acetyl ferrocene (228 mg, 1mmol) in ethyl alcohol (15 ml) was added KOH (110 mg, 2 mmol) and stirred at room temperature for 15 min, then appropriate aromatic aldehyde (1 mmol) in ethyl alcohol (5 ml) was slowly added and the mixture was allowed to stirred at room temperature. After complete consumption of acetyl ferrocene (monitored by TLC, a red to purple colour solid was formed), 2-hydrazinobenzothiazole (165 mg, 1.0 mmol), KOH (110 mg, 2 mmol) and additional ethyl alcohol (5 ml) and was slowly added and the resulting mixture was refluxed for overnight. After completion of the reaction (monitored by TLC, an orange to red colour solid was formed), the reaction mixture was cooled, the solid formed was filtered, washed with cold ethanol-water mixture, water and air dried. The resulting solid was purified by column chromatography using n-hexane/ethyl acetate mixture (9:1 to 8:2) to obtain the ferrocene derivative.

The chemical industry reduces the impact on the environment during synthesis,1271-55-2,Acetylferrocene,I believe this compound will play a more active role in future production and life.

Reference：
Article; Kiran Kumar, Chakka; Trivedi, Rajiv; Giribabu, Lingamallu; Niveditha, Surukonti; Bhanuprakash, Kotamarthi; Sridhar, Balasubramanian; Journal of Organometallic Chemistry; vol. 780; (2015); p. 20 – 29;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Ferrocenecarboxylic acid, and cas is 1271-42-7, its synthesis route is as follows.

a. Ferrocenecarboxylic acid (11.5 g, 0.05 mol) was mixed with 100 mL of dichloromethane (DCM) under ice bath and stirred well.N-hydroxysuccinimide (NHS) (7.0 g, 0.06 mol) was added to the above reaction system under vigorous stirring.1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC·HCl) (11.5 g, 0.06 mol).The reaction was carried out for 4 to 6 hours in an ice bath, the solution was gradually clarified, and the reaction was monitored by TLC.After completion of the reaction, suction filtration was performed to obtain a dichloromethane solution of the intermediate (1).

1271-42-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1271-42-7 ,Ferrocenecarboxylic acid, other downstream synthetic routes, hurry up and to see

Reference：
Patent; Shandong University; Yan Bing; Pan Xiujiao; Jiang Cuijuan; Wang Shenqing; Kong Long; Zhai Shumei; Hu Chun; Zhou Li; (17 pag.)CN109288860; (2019); A;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Ferrocenemethanol, and cas is 1273-86-5, its synthesis route is as follows.

General procedure: To a solution of ferrocenylcarbinol, FcCHR(OH), (1.0 mmol) and 2-thiobenzimidazole (1.0 mmol) in acetone (5.0 ml) two drops of trifluoroacetic acid were added. The reaction mixture was stirred overnight until the residue was formed. Then the residue was filtered, washed with cold ether (2 x 20 ml) and dried in vacuo over CaCl2. N-ferrocenylmethyl-2-thio-benzoimidazole (3a) Yield 74%. Yellow powder, m.p. 198-200?. Anal.: ? 60.81; ? 4.77; N 7.81; S 8.76%. Calc. for ?18?16FeN2S: ? 60.52; ? 4.80; N 7.84; S 8.98%. EI-MS, m/z (RI, %): 348 [M]+ (83). 1? NMR (CDCl3, delta, ppm): 4.11 (s, 2H, Fc); 4.25 (s, 5H, Fc); 4.49 (s, 2H, Fc); 5.28 (s, 2H, CH2); 7.15-7.22 (m, 4H, Het); 10.43 (s, 1H, SH). 13C NMR (CDCl3, delta, ppm): 51.7 (CH2), 66.3 (C5H4), 66.9 (C5H4), 69.3 (C5H4), 69.7 (C5H5), 86.9 (ipso-C5H4), 109.9 (Het, C-5), 111.7 (Het, C-6), 122.8 (Het, C-4), 123.2 (Het, C-7), 128.9 (Het, C-9), 131.0 (Het, C-8), 166.7 (C-S).

1273-86-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1273-86-5 ,Ferrocenemethanol, other downstream synthetic routes, hurry up and to see

Reference：
Article; Rodionov, Alexey N.; Zherebker, Kira Ya.; Snegur, Lubov V.; Korlyukov, Alexander A.; Arhipov, Dmitry E.; Peregudov, Alexander S.; Ilyin, Mikhail M.; Nikitin, Oleg M.; Morozova, Nataliya B.; Simenel, Alexander A.; Journal of Organometallic Chemistry; vol. 783; (2015); p. 83 – 91;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1287-16-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenylacetic acid, cas is 1287-16-7,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of ferrocene acetic acid (1 mmol), the required 3-substituted-4-amino-5-mercapto-1,2,4-triazole(1 mmol), and p-toluenesulfonic acid (0.1 mmol) in DMF(10 mL) was stirred until a homogeneous solution was obtained. The mixture was exposed to microwave irradiation for about 3 min at 350 W and then cooled and poured into crushed ice. The mixture was adjusted to pH 7 with potassium carbonate and potassium hydroxide and then kept overnight at room temperature. The crude product was filtered off, dried and recrystallized from 80% ethanol to afford the pure product (Scheme 1).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Ferrocenylacetic acid, 1287-16-7

Reference：
Article; Liu, Yuting; Xin, Hong; Yin, Jingyi; Yin, Dawei; Transition Metal Chemistry; vol. 43; 5; (2018); p. 381 – 385;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

As a common heterocyclic compound, it belongs to iron-catalyst compound, name is Iron(III) acetylacetonate, and cas is 14024-18-1, its synthesis route is as follows.

General procedure: Sample preparation was performed similar to the procedure given in our previous report [15]. Oxide precursors (Fe1-xAlx)3O4 were prepared from a mixture of Fe(acac)3 and Al(acac)3 in an autoclave at 473K for 48h.

14024-18-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,14024-18-1 ,Iron(III) acetylacetonate, other downstream synthetic routes, hurry up and to see

Reference：
Article; Matsumoto, Yoshiyuki; Masubuchi, Yuji; Nakazawa, Yoshiyuki; Itami, Hitoshi; Tsuchiya, Masayuki; Kikkawa, Shinichi; Journal of Alloys and Compounds; vol. 789; (2019); p. 697 – 703;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

It is a common heterocyclic compound, the iron-catalyst compound, Ferrocene, cas is 102-54-5 its synthesis route is as follows.

Add 100ml of dichloromethane to the reaction flask, add 20g of ferrocene, then add 16g of ZnCl2, then add 10g of acetyl chloride to stir at room temperature, control the reaction, after the reaction is over, add the reaction solution In a 5% aqueous solution of hydrochloric acid, the liquid phase was separated, and the organic phase was washed three times with water, and the organic phase was separated. The organic phase was dried and concentrated to give 22 g of acetyl ferrocene in a yield of 90%.

102-54-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,102-54-5 ,Ferrocene, other downstream synthetic routes, hurry up and to see

Reference：
Patent; Nanjing Faen Chemical Co., Ltd.; Wang Kunpeng; Han Yuelin; (5 pag.)CN108409801; (2018); A;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

Name is Iron(III) acetylacetonate, as a common heterocyclic compound, it belongs to iron-catalyst compound, and cas is 14024-18-1, its synthesis route is as follows.

General procedure: A solvothermal method was implemented to prepare CuFe2O4and Fe3O4 NPs. For the synthesis of Fe3O4 NPs, 4 mmol of Fe(acac)3 and 40 ml of triethylene glycol were mixed in a 200 ml round bottom flask connected to a reflux condenser. To homogenize thesolution, the temperature was increased to 100 C and maintainedat this temperature for 1 h. Afterwards the obtained homogenoussolutionwas transferred to a Teflon lined autoclave (75 ml capacity)and then placed in a furnace at 260 C for 24 h. Next, the mixturewas left to cool down to room temperature, which resulted in a black homogeneous dispersion containing magnetite nanoparticles.The obtained product was washed with acetone severaltimes using centrifugation. Then, the nanoparticles were put to dryin an oven at 50 C for 12 h. For the synthesis of CuFe2O4 NPs, thesame procedure was employed except that the stoichiometricamount of Cu(acac)2 was added to the triethylene glycol at the firstof synthesis process. Briefly, the synthesis process is schematicallyshown in Fig. 1.

14024-18-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,14024-18-1 ,Iron(III) acetylacetonate, other downstream synthetic routes, hurry up and to see

Reference：
Article; Fotukian, Seyedeh Maryam; Barati, Aboulfazl; Soleymani, Meysam; Alizadeh, Ali Mohammad; Journal of Alloys and Compounds; vol. 816; (2020);,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

1273-86-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ferrocenemethanol, cas is 1273-86-5,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 1.1 mmol of triethylamine was added to a stirred mixture of 1.0 mmol of metallocene alcohol (7, 8, 12) or 0.45 mmol of ferrocene diol (10, 11) and 1.0 mmol of 4,5-dichloroisothiazole- or 5-arylisoxazole-3-carbonyl chloride in 50 mL of diethyl ether at 20-23C. The reaction mixture was stirred at that temperature during 24 h. The precipitated triethylamine hydrochloride was filtered off and washed with diethyl ether (5 × 10 mL). The filtrate was washed with 10 % aqueous NaCl and 5 % aqueous NaHCO3. The solvent was removed, and the residue was recrystallized from a benzene-hexane (2 : 1) mixture (14, 15, 19, and 20) or from hexane (16,17, 21, and 22). 3,4,4-Trichloro-1-cymantrenylbut-3-en-1-yl 4,5-dichloroisothiazole-3-carboxylate 18 was obtained as a viscous oil and was used without further purification.

The chemical industry reduces the impact on the environment during synthesis,1273-86-5,Ferrocenemethanol,I believe this compound will play a more active role in future production and life.

Reference：
Article; Potkin; Dikusar; Kletskov; Petkevich; Semenova; Kolesnik; Zvereva; Zhukovskaya; Rosentsveig; Levkovskaya; Zolotar; Russian Journal of General Chemistry; vol. 86; 2; (2016); p. 338 – 343; Zh. Obshch. Khim.; vol. 86; 2; (2016); p. 338 – 343,6;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

14024-18-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Iron(III) acetylacetonate, cas is 14024-18-1,the iron-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Fe(acac)3 (3 mmol) was dissolved in 20 ml of oleylamine and 5 ml of n-hexane. The reaction mixture was thoroughly stirred under N2 atmosphere for 30 min in a 50 ml Teflon-lined stainless steel autoclave that was carefully sealed. The autoclave was heated in a furnace at 190 C for 8 h under autogenous pressure. The resulting dark suspensions were extracted by adding 50 ml of ethanol followed by centrifugation. After washing the precipitates three times with ethanol, uniform Fe3O4 NPs were formed. These NPs were redispersed into n-hexane and a black-brown n-hexane dispersion of Fe3O4 NPs was thus obtained. Thus, the Fe3O4 suspension was transferred to 100 ml volumetric flask, evenly mixed with n-hexane for measurement of concentration of Fe3O4 through the 1,10-phenanthroline monohydrate dyeing method using UV-Vis spectrophotometer. Similar procedures for the preparation of Fe3O4 NPs were carried out at different conditions, including different reaction temperatures, times, and solvents. The solvothermal temperatures for samples S1 and S3 differed from that for S2. For samples S4-S6, the reaction times differed from that of S2. For samples S7-S9, the content of n-hexane differed from that of sample S2. The detailed preparation conditions are listed in Table 1 .

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Iron(III) acetylacetonate, 14024-18-1

Reference：
Article; Liu, Jing; Wang, Lu; Wang, Jing; Zhang, Lantong; Materials Research Bulletin; vol. 48; 2; (2013); p. 416 – 421;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

Name is 1,1′-Dibromoferrocene, as a common heterocyclic compound, it belongs to iron-catalyst compound, and cas is 1293-65-8, its synthesis route is as follows.

1,10-Dibromoferrocene [23] (300 mg, 0.87 mmol) was dried for3hat 2*102 mbar in a Schlenk flask. Afterwards, itwas dissolved indry diethylether (2 ml) forming a clear yellow solution. In a separateSchlenk flask diethylether (4 ml) was cooled to 78 C and tertbutyllithiumin n-hexane (2.3 ml, 3.66 mmol,1.6M) was added. Thedissolved 1,10dibromoferrocene was added dropwise to the tertbutyllithiumsolution over a period of 5 min. The resulting mixturewas stirred at 78 C for 1 h. In an additional Schlenk flask NFSI(1.15 g, 3.66 mmol), which had been dried for 3 h in vacuo, wasdissolved in tetrahydrofurane (6 ml). The NFSI solutionwas added tothe reaction mixture within 2 min. Directly after the addition thesolution was quenched with NaBH4 and 20 ml 0.1 M Ca(OH)2.Pentane (50 ml)was added and the two-phase systemwas stirred for1 h. The organic phase was separated and washed 3 times withwater. All solvents were carefully removed in vacuo. The crudeproduct was filtered through alumina (Activity III, diameter 2 cm,length 25 cm) with pentane as mobile phase. After evaporation ofthe solvent, the crude product was purified by HPLC (CH3CN/H2O(70:30); isocratic). The HPLC fractions were extracted with pentane(4 20 ml). The organic phase was dried with MgSO4 and carefullyevaporated in vacuo (the product is volatile). The product was obtainedas a yellow solid.HPLC: CH3CN/H2O (70:30; isocratic). Yellow solid (20 mg,0.09 mmol, 10%);1H NMR (CDCl3): delta 4.39 (app. q, JHH, HF 2.2 Hz, 4H, CpH),3.91e3.89 (app. m, 4H, CpH). 13C NMR (CDCl3): delta 135.9 (d,1JCF 269 Hz, C1,10), 62.5 (d, 3JCF 3.8 Hz, C3,30,4,40), 57.5 (d,2JCF 15.1 Hz, C2,20,5,50). 19F{1H} NMR (CDCl3): delta 189 (s). IR (solid): cm1 3108 (w), 1463 n(C-Caromatic, vs); 1242 n(CeF, m), 1020 (m),803 (vs), 634 (m). MS (EI): m/z 222 [M], 139 [M CpF], 128[Cp2]; calcd for C10H8F2Fe 222.Anal. Calcd for C10H8F2Fe: C, 54.10;H, 3.63. Found: C, 53.33; H, 3.70.

1293-65-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1293-65-8 ,1,1′-Dibromoferrocene, other downstream synthetic routes, hurry up and to see

Reference：
Article; Bulfield, David; Maschke, Marcus; Lieb, Max; Metzler-Nolte, Nils; Journal of Organometallic Chemistry; vol. 797; (2015); p. 125 – 130;,
Iron Catalysis in Organic Synthesis | Chemical Reviews
Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion